- ページ 9

プリンターアクセサリー Epson LQ-570+のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Epson LQ-570+ 14 ページ。 Sdx acd manager 5.2 printer setup
Epson LQ-570+ にも：製品サポート速報 (20 ページ), 製品サポート速報 (5 ページ), 製品情報マニュアル (8 ページ), インストールマニュアル (1 ページ), マニュアル (12 ページ), 仕様 (2 ページ), マニュアル (8 ページ), 製品サポート速報 (16 ページ), サービスマニュアル (49 ページ)

Epson LQ-570+ Printer Operation

Printer Setup Manual

SDX ACD Manager 5.2

6. Make sure your paper has a clean, straight edge. Insert the paper into the

desired paper slot (rear, front, or bottom) until it emerges between the platen

and print head.

7. Pull the paper up until the perforation between the first and second pages is

even with the top of the printer's ribbon.

8. If you insert paper through the front paper slot, re-attach the front cover.

9. Fit the first four holes of the paper over the sprocket pins.

10. Close the sprocket covers.

11. Slide the right sprocket unit to remove any slack in the paper. Then lock it in

place by pushing the sprocket lock lever back.

12. Place the notches on the paper guide straight down over the mounting posts on

the printer.

13. Slightly lift the paper guide and then lower it until it rests on the printer.

14. Slide both edge guides to the middle of the paper guide.

15. Turn on the printer.

16. If necessary, adjust the paper position using the micro-feed feature.

Loading Continuous Paper with the Pull Tractor

Epson LQ-570+ Printer Operation - Page 9

38DHB0002UKBP - Issue 1 (March 1999)