- ページ 4

ネットワーク・ルーター ARGtek Power King StationのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。ARGtek Power King Station 13 ページ。 Wlan outdoor cpe for 2.4ghz
ARGtek Power King Station にも：クイック・インストール・マニュアル (16 ページ)

ページを印刷する

-For CPE2618、CPE2628、CPE2630 configuration

The WLAN Broadband Router is delivered with the following factory default parameters on

the Ethernet LAN interfaces.

Default IP Address: 10.10.10.254

Default IP subnet mask: 255.255.255.0

WEB login User Name: admin

WEB login Password: admin

CPE2628、CPE2630

have four operation modes (Gateway/Bridge/WISP/AP Client).

Bridge/WISP/AP Client:

The default IP addresses for the device are 10.10.10.254, so you need to make sure the IP

address of your PC is in the same subnet as the device, such as 10.10.10.X.

It will take about 25 seconds to complete the boot up sequence after power on from PoE.

Gateway:

The default IP addresses for the device are 172.32.1.254, so you need to make sure the IP

address of your PC is in the same subnet as the device, such as 172.32.1.X.

It will take about 25 seconds to complete the boot up sequence after power on from PoE.

CPE2618

has three operation modes (Bridge/WISP/AP Client).

Bridge/WISP/AP Client:

The default IP addresses for the device are 10.10.10.254, so you need to make sure the IP

address of your PC is in the same subnet as the device, such as 10.10.10.X.

It will take about 25 seconds to complete the boot up sequence after power on from PoE.

ARGtek Communication Inc.

www.argtek.com

E-Mail:[email protected] Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742