- ページ 34

ラジオ Motorola CLP seriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CLP series 48 ページ。 By wsi
Motorola CLP series にも：クイック・リファレンス・マニュアル (2 ページ), クイック・リファレンス (2 ページ), クイック・リファレンス (35 ページ), トラブルシューティングマニュアル (2 ページ)

68012000044-ED

Chapter 6 : Advanced Radio Configuration

Chapter 6

Advanced Radio Configuration

Advanced radio configuration feature allows you to configure settings from a pre-programmed list

without using a computer.

Advanced configuration mode allows you to customize the following settings:

•

Channels

•

Frequencies

•

Codes (CTCC/DPL)

Frequencies allow you to select frequencies for each channel. Codes help minimize interference by

providing you with a choice of code combinations that filter out static, noise, and unwanted messages.

NOTE: This feature is an enhancement feature on CLP radios and may not be available on

previous shipping radios.

6.1

Prerequisites:

NOTE: For bluetooth models, ensure the wired accessory is connected or the bluetooth

headset is paired before entering advanced radio configuration mode.

Turn the radio off.

Procedure:

1 Press the PTT, + button and Power button simultaneously and hold for 3 to 5 seconds until you

hear a sound and the voice prompt Programming Mode.

The LED blinks green.

2 To select the settings you want to change, press the Menu button.

The followings are the settings that you can change:

•

Channel (for multi-channel models)

•

Frequency

•

Code

The voice announcements indicate the menu items and their current settings.

3 To change the settings, press either the + or – button.

4 To go to the next menu item, press the Menu button.

5 To exit the Advanced Radio Configuration mode, press and hold the PTT button until you hear

a sound.