- ページ 5

ラジオ Motorola WHiSP SMのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola WHiSP SM 18 ページ。

Configuring your computer

Your PC will not require any special setup beyond proper installation of Ethernet drives

& drivers. Configuration of your computer's TCP/IP parameters will be specified by

your ISP. However, you will need to temporarily configure your computer's TCP/IP

parameters in order to configure your WHiSP radio.

Configuring your Windows 98 computer

These instructions are for Windows98 and

presume you have already installed your

Ethernet card or Network Interface Card (NIC),

and have installed TCP/IP protocols. If these

are not yet installed, they must be installed

before proceeding.

To temporarily reconfigure your TCP/IP

protocol to configure your WHiSP radio, first

begin by RIGHT clicking on the Network

Neighborhood icon on your desktop. A side

menu appears, and you must LEFT click on the

bottom item labeled "Properties".

D R A F T – 9/10/2001

Presuming your Network Interface Card

(NIC) or Ethernet card is already

installed along with the TCP/IP protocol,

you will see both under the list of

network components installed.

Click the TCP/IP protocol item in the

component list to highlight it, and then

click on the "Properties" button.

This will bring up the TCP/IP Properties

screen shown next.