- ページ 8

ポータブルラジオ Motorola MCS 2000 IIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola MCS 2000 II 20 ページ。

ページを印刷する

MCS 2000 Models II & III

button (13) and use the mode selector (D) until the

desired name and number is displayed. Press the

select button (13) or the PTT (F). The radio then trans-

mits the number.

Note: If your radio has been so programmed,

you can press the phone button for quick access

to the telephone interconnect function. Using the

mode selector (D), you can scroll between last

dialled call and phone number lists.

Keypad Selection (List/Buffered Dialing)

(model III or model II with optional keypad micro-

phone)

Press the phone button (7) or select the menu PHONE

as previously described. Enter the desired number

directly from the keypad. If you are placing a call to a

local extension number requiring a pause before it,

press

If an incorrect phone number is entered, the digits

may be erased using the mode selector (D) to the left/

down. Continue using the mode selector (D) to the

left/down to erase the entire number.

When the number is complete, press the select button

(13) or the PTT (F) to transmit the call.

model III

PLEASE WAIT

555-1212

will be in the display, while the system is setting up the

call.

Trunking only:

If the PHONE system is busy, the display will show

PHONE BUSY

555-1212

and your call will be placed when the system is availa-

ble, unless you press the HOME button (3) or the

menu button (9) to quit telephone Interconnect.

If phone access is unavailable to your radio, the dis-

play shows

NO PHONE

555-1212

Private Call

Receiving a Private Call

When your radio receives a private call, the incoming

private call tone sounds and the display alternates

between

page 8

68P81083C49-B

model II

PLEASE WAIT

PHONE BUSY

NO PHONE