- ページ 3

モデム Motorola MD1600のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Motorola MD1600 17 ページ。 Vdsl2/adsl2+ modem plus ac1600 router
Motorola MD1600 にも：使用方法 (3 ページ)

ページを印刷する

Before you begin

If you are replacing another DSL modem, you should write

down its Username and Password. You can sometimes get

these from the documentation or labels of the DSL modem

you're replacing. You can also log into that modem to check for

a Username and Password; and if you find them, write them

down. Note that these are usually different from the Username

and Password used for email or for your modem's configuration

manager.

If you received your MD1600 from your service provider, please

follow the instructions they provided. Otherwise continue

directly below.

Let's get started

1. First connect the supplied power cube between the

MD1600's power jack and a working electrical outlet. The

MD1600 should power up and the power light on the front

of the unit should turn on amber as the modem initializes.

When the MD1600 is ready to use, the power light should

turn green. If the light does not turn on when you supply

power, press the ON/OFF button on the side of the MD1600.

2. Next connect the supplied phone cord between the

MD1600's DSL jack and a phone jack that provides your DSL

service. If you want to use a phone or other device with the

same phone jack, please use the supplied filter/splitter as

pictured on the next page.

3. If your DSL modem shares the phone line with telephones,

answering machines, or other devices, they can interfere

with the DSL modem if they're used at the same time. You

can prevent interference by using a DSL filter with each

device. We have provided one filter/splitter, but you may

need more filters. If you are using one or more DSL filters,

please see Installing a DSL Filter later in this manual.