- ページ 5

エアコン Toshiba 24E2KVSG-AのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 24E2KVSG-A 12 ページ。

ページを印刷する

ECO OPERATION

To automatically control room temperature to save energy (except in DRY

and FAN ONLY mode)

Press

: Start and stop the operation.

Note : Cooling operation; the set temperture will increase automatically

1 degree/hour for 2 hours (maximum 2 degrees increase).

For heating operation the set temperture will decrease.

FIREPLACE AND 8°C HEATING

OPERATION

Fireplace Operation (

)

Keep indoor unit's fan blowing continuously during thermo off, to circulate heat

from other sources over the room. There are three setting parameters: Default

setting > Fireplace 1 > Fireplace 2

Fireplace 1:

During thermo off period, the indoor unit's fan will continue to run by the same

speed, previously selected by end-user.

Fireplace 2:

During thermo off period, the indoor unit's fan will continue to run at super-low

speed, programmed from factory.

8°C Heating Operation (8°C)

Heat mode operation for keep room temperature (5-13°C) with less of energy

usage.

Fireplace and 8°C Heating Operation

FIREPLACE 1

Note:

● While Fireplace operation on heating mode, indoor unit fan always runs

and cold air breezing might be occurred.

● Fireplace and 8°C will operate in Heating mode only.

PLASMA ION

Capture efﬁ ciency of ﬂ oating impurities in the air is accelerated by plasma ion

contaminates such as bacteria, odor, smoke, dust and virus are caught and

deactivated by Plasma lon.

1. When stopping operation.

● After stopping, automatic cleaning starts

(TIMER lamp turns on).

* When operating time is 10 minutes

or less, cleaning function does not operate.

2. When using together with the air conditioning

Air volume and direction setting of air conditioner have priority.

Operation

● Operate Plasma lon while air conditioning.

Press the

PURE

button.

Stop

● Stop both Plasma lon and air conditioning.

Press the

button.

● Stop only Plasma lon.

Press the

PURE

button.

Note : Plasma lon operation does not remove harmful substances from

cigarette smoke (carbon monoxide etc.). Open a window occasionally

for ventilation.

COMFORT SLEEP OPERATION

For comfortable sleep, automatically control air ﬂ ow and automatically turn

OFF (Except in DRY mode).

1. Press

: Select 1, 3, 5 or 9 hrs for OFF timer operation.

2. Press

to cancel the comfort sleep operation.

Note: The cooling operation, the set temperature will increase automatically

1 degree/hour for 2 hours (maximum 2 degrees increase). For heating

operation, the set temperature will decrease.

8°C

FIREPLACE 2

Normal

operation

PURE

HADA CARE FLOW AND AIR FLOW

OPERATION

HADA CARE FLOW

Air ﬂ ow upward to the ceiling, provide Indirect air ﬂ ow to body and

homogenize room temperature.

AIR FLOW

Comfortable air ﬂ ow can select from this feature.

HADA CARE FLOW and AIR FLOW operation

Press

For start operation as sequence below

HADA CARE FLOW

Wide center

Cancel

Air Flow

Spot left

Note:

● During HADA CARE FLOW mode, FIX and SWING button cannot active

POWER-SELECTION AND SILENT

OPERATION (OUTDOOR UNIT)

Power-Selection (

)

This function is used when the circuit breaker is shared with other electrical

appliances. It limits the maximum current and power consumption to 100%,

75%, or 50% and can be implemented by POWER-SELECTION. The lower

percentage, the higher saving and also longer compressor lifetime.

Note:

● When the level is selected, POWER-SEL level ﬂ ashes on remote LCD

display for 3 seconds.

In case of 75% and 50% level, number "75" or "50" also ﬂ ashes for 2

seconds.

● Due to the reason that POWER-SELECTION function limits the

maximum current, inadequate cooling or heating capacity may occur.

Silent Operation (

)

Keep outdoor unit operating silently to ensure either yourself or neighborhood

will have a tight sleep in nighttime. By this feature, the heating capacity will

be optimized to deliver such silent experience. The silent operation can be

selected from one of two purposes (Silent 1 and Silent 2).

There are three setting parameters: Standard level > Silent 1 > Silent 2

Silent 1:

Though operating silently, the Heating (or Cooling) capacity is still prioritized

to ensure having sufﬁ cient comfort inside the room.

This setting is a perfect balance between the Heating (or Cooling) capacity

and the Sound level of outdoor unit.

Silent 2:

Compromising the Heating (or Cooling) capacity to the Sound level in any

circumstance where the outdoor unit's sound level is highly prioritized.

This setting has a purpose to reduce the maximum sound level of outdoor

unit by 4 dB(A).

Note:

● While activating of Silent operation, inadequate heating (or cooling)

capacity may occur.

Power-Selection and Silent Operation (Outdoor Unit)

[100%]

Wide right

Spot right

Spot center

[75%]

[50%]

SILENT#2

SILENT#1

Wide left