- ページ 7

オール・イン・ワン・プリンター Toshiba 355のPDF 安全情報マニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 355 34 ページ。 Multifunctional digital systems

Notice to Users

After a suitable place has been selected for the installation of the e-STUDIO5520C/6520C/6530C, the e-STUDIO2330C/2820C/

2830C/3520C/3530C/4520C, the e-STUDIO205L/255/305/355/455, or the e-STUDIO555/655/755/855, please do not change it.

Avoid excessive heat, dust, vibration and direct sunlight. Also, provide proper ventilation as the copier emits a small amount of

ozone.

For U.S.A. only

FCC NOTICE

e-STUDIO5520C/6520C/6530C and e-STUDIO555/655/755/855

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 and Part 18 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

e-STUDIO2330C/2830C/3530C/4520C and e-STUDIO205L/255/305/355/455

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own

expense.

WARNING

Changes or modification made to this equipment, not expressly approved by TOSHIBA TEC or parties authorized by TOSHIBA TEC,

could void the user's authority to operate the equipment.

User Safety

This TOSHIBA Multifunctional Digital Systems does not produce laser radiation hazardous to the user. It is certified as a Class 1

laser product under the U.S Department of Health and Human Services (DHHS) Radiation Performance Standard according to the

Radiation Control Health and Safety Act of 1968 including amendments.

Protective housing and external covers completely confine the laser beam light emitted inside the Multifunctional Digital Systems.

The laser beam cannot escape from the machine during any phase of user operation.

Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S Food and Drug Administration

apply to laser products manufactured from August 1,1976. Laser products marketed in the United States must comply with these

regulations.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation

exposure.

Notice to Users