- ページ 12

CDプレーヤー Pioneer Super Tuner IIID DEH-P5800MPのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer Super Tuner IIID DEH-P5800MP 38 ページ。 Owner's manual
Pioneer Super Tuner IIID DEH-P5800MP にも：インストレーション・マニュアル (6 ページ), オーナーズマニュアル (34 ページ)

ページを印刷する

Tuner

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong

signals for good reception.

1. Press FUNCTION to select LOCAL.

Press FUNCTION until LOCAL appears in the display.

2. Press 8 to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears in the display.

3. Press 4 or 6 to set the sensitivity.

There are four levels of sensitivity for FM and two levels for MW/LW:

FM: LOCAL 1 – LOCAL 2 – LOCAL 3 – LOCAL 4

MW/LW: LOCAL 1 – LOCAL 2

The LOCAL 4 setting allows reception of only the strongest stations, while lower

settings let you receive progressively weaker stations.

4. When you want to return to normal seek tuning, press 2 to turn local seek tuning

off.

LOCAL:OFF appears in the display.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automatically store the six strongest broadcast

frequencies under preset tuning buttons 1–6. Once stored you can tune in to those

frequencies with the touch of button.

1. Press FUNCTION to select BSM.

Press FUNCTION until BSM appears in the display.

2. Press 8 to turn BSM on.

BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies

will be stored under preset tuning buttons 1–6 in the order of their signal strength.

When finished, BSM stops flashing.

• To cancel the storage process, press 2.

Note

• Storing broadcast frequencies with BSM may replace broadcast frequencies you have

saved using buttons 1– 6.

RDS

Introduction of RDS operation

RDS (radio data system) is a system for providing information along with FM

broadcasts. This inaudible information provides such features as program service

name, program type, traffic announcement standby and automatic tuning, and is

intended to aid radio listeners in finding and tuning in to a desired station.

TP (

) indicator

Shows when a TP station is tuned

in.

News (

) indicator

Shows when the set news program

is received.

Program service name

Shows the name of broadcast

program.

* Press FUNCTION to display the function names.

Press FUNCTION repeatedly to switch between the following functions:

BSM (best stations memory) – REG (regional) – LOCAL (local seek tuning) – TA

(traffic announcement standby) – AF (alternative frequencies search) – NEWS (news

program interruption)

• To return to the frequency display, press BAND.

• If MW/LW band is selected, you can only select BSM or LOCAL.

Notes

• If you do not operate the function within about 30 seconds, the display is automatically

returned to the frequency display.

• RDS service may not be provided by all stations.

• RDS functions such as AF and TA are only active when your radio is tuned to an RDS

station.

Switching the RDS display

When you tune in an RDS station its program service name is displayed. Switch the

display to find out the frequency.

* Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

Program service name – PTY information – Frequency

PTY (program type ID code) information is listed on page 14.