- ページ 5

スピーカーシステム Pioneer PDP-S33-LR XIN/UCのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PDP-S33-LR XIN/UC 20 ページ。
Pioneer PDP-S33-LR XIN/UC にも：サービスマニュアル (9 ページ)

2 How to route cables

Speed clamps and bead bands are supplied for bunching cables. Once properly bunched, follow the steps below to route the

cables.

When the speakers are installed on the sides

The below rear view shows

Speaker cable

Attaching speed clamps to the main unit

Attach the speed clamps using any of the 5 holes you prefer

marked with

below, depending on your routing system.

flush

mounting, however cable routing for set back mounting will be the same.

Bead band

Speed clamps

Attaching and removing speed clamps

Insert 1 into an appropriate hole on the rear of the Plasma

Display and snap 2 into the back of 1 to lock the clamp.

Speed clamps are designed to be difficult to undo once in

place. Please attach them carefully.

To remove, use pliers to twist the clamp 90°, pulling

outward. The clamp may deteriorate over time and become

damaged if removed.

Bunching and securing cables with the

bead bands.

Do not allow excessive stress to be placed on the ends of

cables.

English

Speaker cable