- ページ 6
換気フード Whirlpool UXT4030AYT0のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool UXT4030AYT0 24 ページ。 30" (76.2 cm) and 36" (91.4 cm) range hood installation instructions
ページを印刷する
INSTALLATION INSTRUCTIONS
NOTE: Before making cutouts, make sure there is proper
clearance within the ceiling or wall.
1. Disconnect
power.
2. Select a flat surface for assembling the range hood. Place
covering over that surface.
3. Lift the range hood and set it upside down onto covered
surface.
4. If cabinet has recessed bottom, add wood filler strips on each
side. Install screws to attach filler strips in locations shown.
Wood filer strips
(recessed cabinet
bottoms only)
3" (7.6 ore)
Wal
Determine Wiring Hole Location
To wire through top:
1. Mark a line distance "A" from the right of the centerline on the
underside of the cabinet. Mark the point on this line that is
7/8"(2.2 cm) from back wall. Drill a 1W' (3.2 cm) diameter hole
through the cabinet at this point.
i
/I
' i ' '!
1
I
'I
....
\
'_1
A
7/=. ( 2.2cm)
from
waH_
not cabinet
frame
i
Centerline
A. 83/8 '' (21.3 cm) for30" (76.2 cm) models
113/8 ' ' (28.9 cm) for 36" (91.4 cm) models
To wire through wall:
1. Mark a line distance "A" from the right of the centerline on the
underside of the wall. Mark the point on this line that
is 7/8"(2.2 cm) from the underside of the cabinet. Drill a
1V4" (3.2 cm) diameter hole through the rear wall at this point.
Cut only one 1V4" (3.2 cm) diameter wiring access hole. See
Step 2 for wiring hole location instructions.
1. Determine and clearly mark a vertical centerline on the wall
and cabinet in the area the vent opening will be made.
i
i
I,
i
Centerline
A. 83/8"(21.3 cm) for30"
(76.2 cm) models
11%" (28.9 cm) for 36" (91.4 cm) models
A. Centerline
6