- ページ 31

プリンターアクセサリー Xerox Adaptive CMYK+ KitのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox Adaptive CMYK+ Kit 48 ページ。 For the xerox versant 180 press

Installing the Replacement Developer Drawer

Assembly

Caution:

Before you open a drawer in the storage cart, ensure that all drawers are closed. Do

not open more than one drawer at a time.

Caution:

To avoid pinching your fingers between the developer drawer assembly and the press,

use caution when installing the developer drawer assembly.

1. From the storage cart, remove the developer drawer assembly associated with the required toner

kit.

2. Hold the developer drawer assembly above the rail assembly and rest the back of the drawer on

the frame brackets. On each side, line up the mounting boss on the drawer frame with the

corresponding notch on the rail assembly.

3. Lower the developer drawer assembly into position on the rail assembly. Ensure that the

mounting boss on either side of the developer drawer assembly has slipped into the

corresponding notch on the rail assembly.

4. Push the developer drawer into the press until the developer drawer clicks into place.

Tip:

The click sound indicates that the developer drawer is seated properly inside the press.

Xerox

Adaptive CMYK+ Kit for the Xerox

Replacing a Toner Kit

Versant

180 Press

Accessory Reference Guide