- ページ 28

楽器 Yamaha Arius YDP-135のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Arius YDP-135 36 ページ。 Owner's manual
Yamaha Arius YDP-135 にも：参考 (6 ページ), クイック・オペレーション・マニュアル (2 ページ)

ページを印刷する

MIDI Functions

You can make detailed adjustments to the MIDI settings.

MIDI Transmit/Receive Channel Selection

In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data

transfer.

This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data.

Setting the transmit channel

While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press

one of the C1–E2 keys.

Setting the receive channel

While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press

one of the C4–F5 keys.

Lowest key

When MIDI receive channel is set to ALL:

A "Multi-timbre" Receive mode is available. In this mode, this instrument receives

different parts from the connected MIDI device on any or all 16 MIDI channels and

plays multi-channel song data.

When MIDI receive channel is set to 1+2:

A "1+2" Receive mode is available. It allows simultaneous reception on channels 1

and 2 only, enabling this instrument to play 1 and 2 channel song data received from a

music computer or sequencer.

Local Control On/Off

"Local Control" refers to the fact that, normally, the keyboard of this digital piano controls its internal tone generator,

allowing the internal Voices to be played directly from the keyboard. This status is called "Local Control On," since the

internal tone generator is controlled locally by its own keyboard.

Local control can be turned Off, however, so that the keyboard of this digital piano does not play the internal Voices, but the

appropriate MIDI information is still transmitted via the MIDI [OUT] connector when notes are played on the keyboard. At

the same time, the internal tone generator responds to MIDI information received via the MIDI [IN] connector.

While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons

simultaneously, press the C6 key.

Pressing the C6 key repeatedly toggles between Local Control On and Off.

YDP-135 Owner's Manual

D 2

2 4

7 9 1 1

14 16

1 3 5 6 8 10

1213 15

For setting the

transmit channels.

–

(C1

D 2)

Off

2 4

7 9 1 1

14 16

1 3 5 6 8 10

12 1315 1+2

For setting the

receive channels.

–

(C4

F5)

ALL

Highest key

In Dual mode, Voice 1 data is

transmitted on its specified

channel and Voice 2 data is

transmitted on the next greater

channel number relative to the

specified channel. In this

mode, no data is transmitted if

the transmit channel is set to

"Off."

Program change and other

like channel messages

received will not affect this

instrument's panel settings or

the notes you play on the

keyboard.

Data for the demo song,

50 piano preset songs and

user song cannot be

transmitted via MIDI.

When Local control is turned

Off, playing the keyboard of

this instrument does not sound

the internal Voices.

Default setting: On