ページを印刷する
USE
Control panel
1
2 3
The Controls
In this fully integrated appliance the controls are located
on the top of the door. When selecting a programme,
the door needs to be partially opened.
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short «instruction accepted» signal
When any of the buttons is pressed: a short audible
signal informs you that the machine has accepted the
instruction given.
Long «programme run» signal
A continuous audible signal lasting about one second,
heard only when you close the dishwasher door,
informs you that the washing programme is starting.
Intermittent «end of programme» signal
An intermittent audible signal, lasting in total five
seconds, informs you that the wash programme has
ended. If you wish to deactivate these audible signals,
press both the
65° and
buttons together for about 3 seconds, until the
intermittent audible signal can no longer be heard.
To reactivate the audible signals, press both buttons to-
gether again for about 3 seconds, until an intermittent
audible signal is heard.
70
65
SO66
70
65
4
1. ON/OFF Pushbutton
Depress this pushbutton to switch the dishwasher on.
The pilot light
washing programme can be selected and started. De-
press again this button to switch the appliance off.
2. Salt Refill Indicator Light
This light illuminates when the salt container needs
refilling.
This light will remain on in a soft water area where
salt is not required.
3. Pilot Light
This illuminates on when the ON/OFF button (3) is
depressed, indicating that the machine is on.
4. Programme Selector Buttons
55° programme
Depress the button corresponding to the desired
washing programme (see washing programme chart).
5. End of Cycle Indicator Light
This light flashes when the programme has finished.
55
55
To switch it off depress the ON/OFF pushbutton (1).
PPC13GB
23
55
55
5
(3) illuminates indicating that the