- ページ 19

冷凍庫 Zanussi ZFC727WAPのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZFC727WAP 44 ページ。

ページを印刷する

Problem

It is too cold inside the

freezer.

The appliance does not

work at all. Neither cooling

nor lighting works.

Customer Service

If your appliance is still not working properly af-

ter making the above checks, contact the near-

est service centre.

To obtain fast service, it is essential that when

you apply for it you specify the model and serial

number of your appliance which can be found

either on the guarantee certificate or on the rat-

ing plate located on the external right side of the

appliance.

Replacing the lamp

1. Disconnect the mains plug from the mains

socket.

www.zanussi.com

Possible cause

Large quantities of food to be frozen

were put in at the same time.

Food placed in the appliance was

too warm.

Products to be frozen are placed

too closely to each other.

The lid has been opened often.

The lid has been opened for a long

time.

The temperature is not set correctly.

Plug is not connected to the mains

socket properly.

Power does not reach the appli-

ance.

The appliance is not switched on.

There is no voltage in the mains

socket (try to connect another ap-

pliance into it).

Wait some hours and then check the

temperature again. Next time insert

smaller quantities of food to be frozen

at any one time.

Allow food to cool to room tempera-

ture before storing.

Place the products in a way so that

cold air could circulate among them.

Try to not open the lid often.

Do not leave the lid open longer than

necessary.

Set a warmer temperature.

Connect the mains plug properly.

Try connecting another electrical de-

vice to the power outlet.

Switch on the appliance.

Call an electrician.

2. Replace the lamp with one of the same

power and specifically designed for house-

hold appliances. (the maximum power is

shown on the lamp cover)

3. Connect the mains plug to the mains sock-

et.

4. Open the lid. Make sure that the lamp

comes on.

Solution