- ページ 10

冷凍庫 Zanussi ZFU20200WAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZFU20200WA 16 ページ。
Zanussi ZFU20200WA にも：ユーザーマニュアル (36 ページ)

ページを印刷する

Positioning

Install this appliance at a location where the

ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the

appliance:

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Location

The appliance should be installed well away

from sources of heat such as radiators, boilers,

direct sunlight etc. Ensure that air can circulate

freely around the back of the cabinet. To ensure

best performance, if the appliance is positioned

below an overhanging wall unit, the minimum

distance between the top of the cabinet and

the wall unit must be at least 100 mm . Ideally,

however, the appliance should not be posi-

tioned below overhanging wall units. Accurate

levelling is ensured by one or more adjustable

feet at the base of the cabinet.

Warning! It must be possible to

disconnect the appliance from the mains

power supply; the plug must therefore be easily

accessible after installation.

Electrical Connection

Caution! Any electrical work required to

install this appliance should be carried out

by a qualified electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be observed.

Important! The wires in the mains lead are

coloured in accordance with the following

code:

A Green and Yellow:

C Brown:

D Blue:

As the colours of the wires in the mains lead of

this appliance may not correspond with the col-

oured markings identifying the terminals in your

plug, proceed as follows:

1. Connect the wire coloured green and yel-

low to the terminal marked either with the

letter "E" or by the earth symbol

oured green and yellow.

2. Connect the wire coloured blue to the ter-

minal either marked with the letter "N" or

coloured black.

Earth

Live

Neutral

or col-