水ポンプ Alemite 7730のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Alemite 7730 14 ページ。 High-pressure bulk grease pump
ページを印刷する
High-Pressure Bulk Grease Pump
Description
The major components of pump model 7730 consist of an air-
operated motor and a pump tube. The air motor connects directly
to the double-acting reciprocating pump tube.
This high-pressure (75:1 ratio) grease pump is designed to
deliver a range of greases [up to NLGI # 3] directly from bulk
containers.
Mounting
In most cases these pumps connect horizontally to a bulk
container. See Figure 6. The pump includes the male portion of a
3-inch camlock connection for ease in installation.
Distribution System
The use of the proper equipment that comprise the entire
product distribution system is essential.
All components must have a pressure rating that allows safe
operation at the maximum anticipated pump pressure.
Specifications
Air Motor
Piston Diameter x Stroke
Inches
Centimeters
4-1/4 x 4
10.8 x 10.2
For information on the air motor, refer to Service Guide SER 323440-4
Pump Tube
Max. Material
Pressure
Material
Outlet
psi
Bars
1/2 " NPTF (f)
7500
517
* For detailed information, refer to Figure 3
Table 1 7730 Model Series Specifications
This document contains confidential information that is the property of Alemite Corporation
670700
and is not to be copied, used, or disclosed to others without express written permission.
Service Guide
Max. Air Pressure
Air Inlet / Outlet
psi
3/4 " NPTF (f)
100
Max. Delivery/Minute
Displacement
(Approximate)*
per Cycle
3
Pounds
Kilograms
in
12.5
5.7
1.36
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
www.alemite.com
©
Copyright
2001 by Alemite Corporation
Bars
6.9
3
cm
22.3
Figure 1 High-Pressure Bulk Grease Pump
7730
Model 7730
SER 7730
Revision (8-01)