- ページ 13

製氷機 afterNOON CIM-15 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。afterNOON CIM-15 Series 20 ページ。 Snowflake ice shaver

Cleaning CIM-15/Series

re uently clean the ice shaver to keep it clean and prevent sanitary issues.

nplug the power cord when cleaning the ice shaver or replacing parts.

Do not directly spray water on the ice shaver. This may cause failure short circuit electric shock or fire.

Do not use powder detergent benzene thinner hydrochloric acid petroleum hot water or rough brushes.

This may cause corrosion or damage to the product.

When using a detergent wet a soft towel in lukewarm water or a neutral detergent and wipe the product.

After using a detergent wipe the product with a clean wet towel once more.

Cleaning unction

Press the peration button

The compressor will stop working and the drum will work for

Press the Mode button, and the Water supply valve wil be opened or closed.

3 Press the peration button for

The Cleaning icon

e careful to prevent water from flowing into the control box when cleaning the product.

Failure to do so may cause operational failure, short circuit or errors.

Cleaning inside the roduct

Turn the Power off and unplug the power cord from the outlet.

emove the container for additives and open the top plate of the ice shaver.

pen the tank cap and screws at the bottom of the ice shaving drum and completely remove water or milk

from the tank. Push the fix bolt to the direction of the arrow to separate the tank from the back.

Dilute dishwashing detergent in lukewarm water and wet a clean cloth or towel withthis. Clean the tank and the drum.

terilize the drum and inside the drum using the disinfectant or a steam cleaner and wipe with clean cloth.

ssemble the tank in the reverse order of tank disassembly. e careful to prevent water from flowing into the

electronic parts.

Close the top plate of the ice shaver.

Ice will not form when the tank is not fi ed.

e careful of the sharp blade of the knife and the sharp edge of the tank.

e careful to prevent water from flowing into the electronic parts.

during operation or after stopping the product for

seconds to stop cleaning.Cleaning will stop.

will flash on the CD screen during cleaning.

seconds.

minute.