- ページ 15

製氷機 afterNOON CIM-15 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。afterNOON CIM-15 Series 20 ページ。 Snowflake ice shaver

ページを印刷する
Check before Requesting Service
Check the following before requesting customer service.
The product doesn't work properly due to improper usage that doesnot comply with the instructions.
If the product has any functional errors, check the product in accordance with the table below.
If the issues persist even after checking, contact the customer service center.
Issues
●
1. The product will
●
not activate.
●
●
2. Water is not supplied.
●
●
●
3. The product is
●
activated but ice
●
is not made.
●
●
●
4. Loud or abnormal
●
noises.
●
●
5. The followings are
not errors of the
●
product.
●
S
e
s
es
is i
es
i e
< Errors and Actions >
rror Codes
What to Check
Is the power supply 220V ±10%?
Is the power cord connected properly?
Is the power switch turned on?
Is the water valve opened?
Is water cut off?
Is the water supply hose connected properly?
Is there no ice in the drum or ice in one side in the drum?
Does the buzzer sound while the Container LED flashes?
Does the compressor workproperly?
Are there any heating appliancesnear?
Does the buzzer sound while the Water LED flashes?
Is the floor where the product is installed unstable or weak?
Is any side of the Ice Shaver in contact with other objects?
Is the ice thick or abnormal?
The product may shake a little during operation. This is not an error.
There may be slight water drops condensing through the shaved ice outlet becaus of the freezing inside. This is not an error.
The buzzer may sound for a moment at initial operation and the relevant Mode LED may flash.
It is automatically released when the tank is filled.
re ire
s
r ser i e r
s C
i er C
i er C
Causes
ack of water
ack of additives
Idle Working
efrigerant Pressure rror
igh Pressure
Motor rror
Power Part rror
Coolant upply rror
Coolant alve rror
Water eakage
Check the power supply.
●
Plug in the power cord.
●
Turn the power switch on.
●
Open the water supply valve.
●
Wait until water is supplied again.
●
Connect the water supply hose.
●
Contact the customer service center after checking.
●
Place the additives in the container.
●
Contact the customer service center after checking.
●
Keep as far away from heating appliances as possible.
●
Contact the customer service center after checking the water
●
supply valve.
Level off the Ice Shaker and firmly install it on a stable floor.
●
Keep the distance to other objects to be over 10cm.
●
Contact the customer service center after checking.
●
r s e e
er e
i
S
r C
r s re
Check if the water valve is opened.
Check if there are additives in the container.
Do not allow the product to idle for a long period.
Contact the customer service center.
Contact the customer service center.
Contact the customer service center.
Check if the hydraulic pressure
Check if water is cut off.
Close the water valve and contact the customer service center.
ctions
rr
eri
i e C e i
se
ctions
this may cause Compressor error
. kPa is normal.
e