- ページ 19

モニター Lenovo 60FD-HAR1-WWのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Lenovo 60FD-HAR1-WW 38 ページ。

Selecting a supported display mode

The display mode of the monitor uses is controlled by the computer. Therefore, refer to your

computer documentation on how to change display modes.

The image size, position and shape might be changed when the display mode changes. This is

normal and the image can be re-adjusted using automatic image setup and the image controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel

technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is currently configured

to a display mode outside the range of this monitor, you may need to reattach the CRT monitor

temporarily until you have re-configured the system; preferably to 1280 x 1024 at 60 Hz,

which is a common display mode.

The display modes shown below have been optimized at the factory.

Table 2-2. Factory set display modes

PAL

720x400

640x480

800x600

1024x768

1152x864

1280x800

1280x1024

Timing

Refresh rate(Hz)

50 Hz

70 Hz

60Hz

66 Hz

72 Hz

75 Hz

60 Hz

72 Hz

75 Hz

60 Hz

70 Hz

75 Hz

60 Hz

72 Hz

75 Hz

2-7

Chapter 2.