ページを印刷する
Specifications
—continued
Built-in Speedlight
Activated by pressing Speedlight lock-release button, guide number:
15 (at ISO 100, m); flash coverage: 28mm or longer lens; film speed
range: ISO 25 to ISO 800 (same range as optional Speedlight)
Flash control
Controlled by TTL Sensor
• Matrix Balanced Fill-Flash: possible with CPU lens and built-in
Speedlight or optional Speedlight
• Centre-Weighted Fill-Flash: in M exposure mode, Centre-
Weighted Metering
• Standard TTL: non-CPU lens
Flash sync mode
Normal, Red-Eye Reduction, Red-Eye Reduction with Slow Sync,
Slow Sync
Flash recommended
Blinks in low brightness or when flash is recommended
indication
Ready light
• Flash fully charged: lights (minimum charging time:
approx. 4 sec.)
• Full output warning: blinks (3 sec. after flash)
Accessory shoe
Standard ISO-type hot-shoe contact; ready-light contact, TTL flash
contact, monitor contact; mount receptacle for Posi-Mount system
Film loading
Film automatically advances to first frame when camera back is
closed
Film advance
Film automatically advances one frame when shutter is released; in
b exposure mode, shots are taken as long as shutter release
button is depressed; shooting speed: approx. 1 fps
Frame counter
Digital display in LCD panel; additive type; counts back while film is
being rewound
Film rewind
Film automatically starts to rewind at the end of the film roll; rewind
speed: approx. 17 sec. with 36-exposure film or approx. 14 sec.
with 24-exposure film; mid-roll rewind possible
74
Number of 36-exposure
(24-exposure) film rolls
Without flash
per set of fresh batteries
With flash for half
of all exposures
* For autofocus operation using an AF Zoom-Nikkor 35-80mm
f/4-5.6D lens, covering the full range from infinity ( ) to the
closest distance and back to infinity ( ) before each shot, with a
shutter speed of 1/125 sec. or faster.
LCD panel information Shutter speed, aperture, flash sync mode, film speed, exposure
compensation, frame counter/compensation value, ‡ warning,
‹ warning, ° warning, film loading, self-timer, battery power
and Flexible Program
Date/time imprint
Display mode: Year/Month/Day, Day/Hour/Minute, No Imprint,
function
Month/Day/Year and Day/Month/Year
(For F60
only)
Built-in clock: 24-hour type with timing accuracy within ±90
D
seconds a month; leap year adjustment until 2019
Usable film: ISO 32 to 3200 DX-coded film
Power source: One 3V lithium battery (CR2025 type)
Battery life: Approx. 3 years*
* May vary depending on extent of imprint use, film speed in use,
etc.
Camera back
Hinged back with film cartridge confirmation window;
unchangeable
Power source
Two CR123A or DL123A-type lithium batteries
Battery power
I for sufficient power; O indicates batteries are nearing
confirmation
exhaustion; blinking O indicates batteries are just about
exhausted; no indication/ symbol appears when batteries are
completely exhausted or improperly installed
Tripod socket
1/4 (diameter, JIS standard)
Dimensions (WxHxD)
F60: Approx. 148.5 x 96 x 69mm
F60
: Approx. 148.5 x 96 x 70mm
D
Weight
F60: Approx. 575g
(without batteries)
F60
: Approx. 585g
D
All specifications apply when fresh CR123A-type batteries are used at normal
temperature (20˚C).
Specifications and design are subject to change without notice.
At 20°C
At –10°C
Approx. 65 (85)
Approx. 38 (50)
Approx. 16 (21)
Approx. 10 (13)
75