- ページ 2
スピーカーシステム Acoustech HT-56のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Acoustech HT-56 4 ページ。 Weather-resistant speaker system
ページを印刷するUnpacking
Carefully remove your new Acoustech speakers
from the box. Inspect the speakers for transit
damage. If you discover damage, contact your
dealer immediately. Save your carton — it is
the best possible protection for your speakers
should you ever have a need to move them.
Indoor Speaker Setup(s)
The diagram below shows 5.1, 6.1, and
7.1 speaker placement.
Front left & right
Add for
7.1
Rear left & right
Add for 6.1 only
Once you have determined the placement for
your speakers, you also have the option of
mounting them to the wall. Figure 2 shows how
to use the mounting brackets provided.
Center
Optional
subwoofer
right or left side
Add for
In or Outdoor Mounting and Hookup
STOP! — Make sure that you consult your
amplifier's owner's manual regarding speaker
hook-up. Your amplifier should be turned off
throughout this procedure.
A word about speaker wire
There are a number of quality speaker wire
products available today. Most of these prod-
ucts offer obvious sonic benefits over lamp
cord and light gauge wires. The HT-56 speak-
ers come equipped with inputs that allow the
greatest flexibility and choice of hook-up wire
and connectors. The choice of speaker wire is
dependent on the type of amplifier, the dis-
tance you intend to run the wire, and your
budget, among other things. If in doubt as to
which brand or type of wire and connector to
use, consult your audio dealer.
Step 1
Loosen the
two knobs.
Remove the
bracket from
speaker.
7.1
Step 2
Run the
appropriate
gauge wire
from your
amplifier
to the
Acoustech
speaker
location.
Step 1
Step 2