ページを印刷する
Installation (continued)
6
Connecting the wiring
receiver into the Canopy.
Connect green wires from motor shell to bare (ground) wire using
wire connector.
Connect black wire from receiver unit marked "AC IN L" to black
supply wire using wire connector.
Connect white wire from receiver unit marked "AC IN N" to
Connect white wire from receiver unit marked "TO MOTOR N" to
white wire from fan using wire connector supplied with receiver unit.
Connect black wire from receiver unit marked "TO MOTOR L" to
black wire from fan using wire connector supplied with receiver unit.
Lastly, connect blue wire from receiver unit to the blue fan light wire
using wire connector supplied with receiver unit.
White to AC IN N
Green Wire to
Black to AC IN L
H
BLK-ANT
A
HARDWARE USED:
WIRE
CONNECTORS
Listed
Outlet Box
White to Motor N
Black to Motor L
Blue to Light
Green Wire
(Ground)from
Motor Shell
CC
x 6
7
Installing the canopy
WARNING: Ensure that the electrical wires are
completely inside the canopy and not pinched between
the canopy and the ceiling. Failure to do so could result in
electric shock or fire.
□ Fix the ceiling fan fixture (A) to hanger bracelet (B) with
(BB) screws.
A
9
B
BB