ページを印刷する
- 1. Safety Precautions
- 2. Battery Installation and Replacement
- 3. Parts Description
- 4. Hold Function
- 5. Selection of Auto Shut off Mode
- 6. Selection of Auto Backlight Mode
- 7. Before Weighing
- 8. Error Messages
- 9. Weighing Procedures
- 10. How to Calibrate
- 11. Specifications
- 12. Weight Range
- 13. Wall Mounting
USING ANY WEIGHT CALIBRATION
During manufacture the scale is already accurately calibrated. However when the scale is
first set up for use it may be desired to calibrate it, or after time and use when mechanical
deviations can occur making the scale less accurate. If the scale has been moved to a
different altitude or gravitation the scale can lose accuracy as the weight of a mass in one
location could be different to that in another location. It is also recommended to calibrate
in these circumstances.
What is the The Any Weight Calibration
Normally when a user wishes to calibrate their scale, the manufacturer either requests the
unit be sent to its head office, service agent or ask that you purchase special accurate
and expensive weights.
The Any Weight Calibration
special weights. Instead you can use any objects that you are confident of their weight for
easy and quick calibration. This could be, for example, items weighed at the deli or meat
counter in the supermarket, bags of pre-packed sugar, flour or even packs of cola cans or
coins that you have had pre-weighed on Legal for Trade scales in the supermarket or
market. The weight can be in kg, g, lb or oz and do not have to be whole units, i.e. could
be 10.15kg, 52.73kg, 12.6lb or 300.7lb.
HOW TO CALIBRATE
It is recommended, but not essential, to use a total weight that is at least 50% of the total
capacity. So, for example, if your scale has a capacity of 16kg, then the ideal weight to
use would be 8-13kg. You could combine the known weight of several items. Never
exceed the total capacity of the scale. Lower calibration weights are ok (i.e. 5Kg) if the
scale is normally only used with items that weigh less than 50% scale capacity.
1. Turn on the power by pressing [ON/OFF] and leave switched on for at least 1 minute
before proceeding to step 2 below.
2. Turn off power by pressing [ON/OFF]
• Press [UNIT] and [ON/OFF] at the same time, now the display will show "CALu="
• Press [UNIT] to select the type of calibration unit to be used, i.e. kg or lb.
• Press [ZERO] to enter the Weight Selection Mode. In this mode you are now able to
enter the exact weight of the item you are using to calibrate the scale.
Press [HOLD] = increases the value of the flashing number
Press [UNIT]
SYSTEM
®
System?
®
System allows you to calibrate without needing to use any
®
= moves to next number on the right
CALIBRATION
PROSHIP
9
®