ページを印刷する
Operating
manual
RADIO RECEIVER
AR-1-500N
ENGLISH
DESCRIPTION
1.
Designed for remote control of automatic doors. This radio receiver
is used with radio controls AT-4A and AT-4N. When a command from
the radio control is received, the receiver output closes for ~ 1 sec-
ond.
TECHNICAL SPECIFICATIONS
2.
Number of control channels ...................................................................................... 1
Working supply voltage ....................................................... 12 V to 24 V DC / AC
Absorbed current (NMT)................................................................................... 18 mA
Working frequency ................................................................................... 433.92 MHz
Number of remote controls accepted .....................................up to 500 pcs
Relay output .....................................................................................................................NO
Output contact load .................................. 0.5 А max., 24 V DC / 0.25 A max.,
Enclosure protection degree .............................................................................. IP40
Ambient temperature ................................................................. − 20 ° С ... + 50 ° С
Overall dimensions (NMT) ..................................... 78 mm × 44 mm × 25 mm
Connection cable length (NLT) ................................................................450 mm
Weight (NMT)................................................................................................................75 g
Y
The company reserves the right to introduce changes to
this manual and technical specifications of the product. The
content of this manual cannot be used as a grounds for legal
claims.
INSTALLATION
3.
Installation of the receiver can be performed in two ways: by moun-
ting using the self-adhesive pad (included in the kit); or by means of
the enclosure fixation holes (fig. 1). Perform the receiver connection
in accordance with Figure 2.
AR-1-500N
LEARN
LED
BUTTON
Ø3,5 mm
Figure 1
Y
The installation location should provide high-quality recep-
tion of the radio signal (no screening and reflecting surfaces
or other sources of radio emission). Before starting connec-
tion works, ensure that the supply has been isolated so that
the wiring is not live.
REMOTE CONTROL PROGRAMMING
4.
125 V AC
RECORD
press 'LEARN BUTTON' of receiver
press and release the selected remote
control button
press the same button again
DELETING
Press and hold (~ 8 s) 'LEARN BUTTON'
of receiver
When recording a remote control that has previously been added
to memory earlier, the remote control will be overwritten, and if
the another button has been pressed while recording, then a new
remote control button will be added to memory. The deleting pro-
cedure leads to deleting of all added radio controls from the receiver
memory.
5.
6.
+U
GND
NO
Figure 2
'LED' Indication
illuminates
does not illuminate
7.
flashes several times
'LED' Indication
flashes (~ 8 s)
STORAGE, TRANSPORTATION
AND DISPOSAL
Keep the packed product in dry premises at temperatures between
of 0 ... + 25 ° С and relative air humidity no more than 80 %. The air
inside the premises must not contain acidic, alkaline and other ag-
gressive substances. Do not expose the product to the precipitation
or direct sunlight. Storage period—3 years from the date of manu-
facture. Transportation may be carried out by means of any roofed
land vehicle fitted with the means to prevent crushing of packages
and load retention equipment.
Disposal is to be performed in accordance with the current
waste processing and disposal regulations applicable in
the country of the Customer. The product does not con-
tain precious metals and substances that pose a threat to
life, human health or the environment. Operation life—
5 years.
WARRANTY
The warranty on the operation capacity of the product is provided if
the storage, transportation and maintenance operations are carried
out according to the set regulations. The warranty period is three
years. Under the warranty, the service department only eliminates
malfunctions caused by the fault of the Manufacturer.
Note: the parts replaced under the warranty are considered the pro-
perty of the service department that carried out the product repair.
The warranty does not apply in the following cases:
•
violation of use and storage regulations;
•
alterations performed by unauthorised persons, damage of the
products caused by the consumer or third parties;
•
damage caused by water ingression within the device;
•
force majeure (fires, lightning strikes, floods, earthquakes and
other natural disasters);
•
failure to provide a completed operation manual.
For questions about the service please contact the organization
that carried out the installation of the equipment.
STATEMENT OF COMPLIANCE
Copies of declarations of compliance can be found at:
http://www.alutech-group.com/en/products/other/automatics/
documents
Made in China
Manufacturer: «Shanghai Baolu Technology Co., Ltd.», 8 / f,
Sianlu Industry Park, 3009 Gudai Road, Shanghai 201100, China,
phone: 0086 21 54888982, fax: 0086 21 54888926
Importer to the Republic of Belarus / Authorised representa-
tive: Alutech Systems s.r.o., 348 02, Czech Republic, Bor u Tachova,
CTPark Bor, Nova Hospoda 19, D5-EXIT 128,
phone / fax: + 420 374 6340 01,
e-mail: [email protected]
12.2018