- ページ 9
3Dプリンター ALVEO3D ALVEOPRO - M100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ALVEO3D ALVEOPRO - M100 20 ページ。 Filtering system for 3d printer - hepa14 & active carbon
ページを印刷するSTEP4 . CONNECT TO ENCLOSURE
Extend the other one end of the hose by 10 cm.
Use the countersunk M4 screw 16 mm for panel thickness from 2 to 7 mm.
Use the countersunk M4 screw 20 mm for panel thickness from 8 to 12 mm.
Place the clamp ring on
1.
the extended hose.
The tighten frame must be
inside the enclosure.
Tighten the clamp ring on
2.
the enclosure connector.
Insert hexagonal M4 nuts
in the tighten frame and
3.
tighten the screws to hold
the enclosure connector
on the panel.
08