計測機器 Akron 3578 STREAMMASTERのPDF 設置、操作、メンテナンスに関する説明書をオンラインで閲覧またはダウンロードできます。Akron 3578 STREAMMASTER 17 ページ。

INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS

The following is intended to provide the basic instructions for installation, operation and maintenance of the

StreamMaster electric monitor, and to assist in attaining the best possible performance from the unit. Read

and understand these operating instructions before use.

TOOLS REQUIRED

• Utility Knife

• Medium Phillips screwdriver

• Small Phillips screwdriver

• Electrician's pliers (multipurpose, stripping and crimping)

PRODUCT RATINGS

Maximum Motor Current Draw:

12 volt versions

24 volt versions

Normal Operating Current: (Depending on operating conditions–pressure, flow, etc.)

12 volt versions

24 volt versions

Minimum Voltage: (Truck engine must be operating for proper voltage requirement.)

All 12 volt motors: 11.5 volts while operating

All 24 volt motors: 23 volts while operating

Mass: 39 lbs. (17.7 kg)

Maximum Flow: 2000 gpm (7600 lpm)

Maximum Pressure: 200 psi (14 bar)

Noise Emission: 95 DL @ 1m with maximum flow

PRODUCT WARNINGS

WARNING: Charge the unit slowly. Rapid charging may cause a pressure surge that has the potential to

cause an injury, or damage the monitor.

WARNING: DO NOT stow or deploy the StreamMaster monitor while flowing. Pressing the stow or

deploy buttons causes the nozzle to move automatically and the water stream may cause

damage to equipment or injury to personnel.

WARNING: Aim the unit in a safe direction before pumping water through it. (i.e. Away from power lines)

STYLE 3578 STREAMMASTER™

(

Version Available)

• Medium flat screwdriver

• Small flat screwdriver

• 1/2 inch hex head wrench

14.0 amps each for elevation and rotation motors

3.0 amps for nozzle pattern motor

7.5 amps each for elevation and rotation motors

1.5 amps for nozzle pattern motor

3.0 to 10.0 amps each for elevation and rotation

0.7 amps for nozzle pattern motor

2 - 5 amps each for elevation and rotation motors

0.4 amps for nozzle pattern motor

118026