- ページ 11

アンプ Ashly Protea NE4250のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ashly Protea NE4250 16 ページ。 Network enabled multi-channel power amplifiers
Ashly Protea NE4250 にも: 取扱説明書 (16 ページ), 仕様書 (2 ページ), 仕様 (2 ページ), 取扱説明書 (16 ページ), 取扱説明書 (16 ページ), 取扱説明書 (20 ページ), 取扱説明書 (20 ページ)

Ashly Protea NE4250 取扱説明書
Operating Manual - NE Multi Channel Power Amplifier
neWR-5 Networked Programmable Remote Control - The neWR-5 remote control is a networked version of the WR-
5, using Ethernet instead of the Data Port to communicate with the amplifier. Connecting and powering the neWR-5 is done
using Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch, hub, or in-line PoE injector. If PoE is
unavailable, the Ashly RPS-18 (sold separately) is a 15-48VDC power supply capable of at least 2 watts per neWR-5 and can be
hard wired to the back of the neWR-5. PoE current draw is 38mA @48VDC and 80mA@15VDC. A decora cover plate (not
included) can be purchased at hardware stores to cover the neWR-5 electrical box and satisfy the aesthetic needs of the instal-
lation.
The neWR-5 appears in the Protea
to a specific amplifier under control. The neWR-5 has six programmable function buttons which can light up green, red, or
amber to display status. Further information on LED status is found in the neWR-5 owner's manual. To the right of the function
buttons is a pocket in the mylar overlay for a printed function label to be inserted. The two other buttons are used to adjust
function parameters such as gain or preset number, and are indicated by the LED display. As with the WR-5, neWR-5 functions
are limited without DSP installed in the amplifier. Note: To use the neWR-5 as a remote level control, a (ne)WR-5 Remote Gain
tool must be placed in one of the DSP processing blocks of the channels(s) to be controlled. presuming that amplifier has DSP
installed.
There is a hard-wired Lock-Out feature on the neWR-5, where the closing of a switch wired to the lockout Euroblock
renders all buttons inactive.
INA-1 Inline RS-232 Adapter - The amplifier Data Port uses a proprietary serial communications protocol which can be
converted to RS-232 using the Ashly INA-1 RS-232 adapter. This allows the use of custom designed third party RS-232
controllers.
ne
5. PROTEA
SOFTWARE
ne
Protea
software offers a comprehensive suite of tools for controlling Ashly NE multichannel amplifiers as well
as other Ashly products. The standard NE multichannel amplifiers allow for ethernet control and monitoring of power
functions, level, mute, and polarity. With the DSP option installed, software control and monitoring of major audio
functions can be custom configured on a per channel basis, as well as through linked channels. More in depth discussion
of software features can be found in the Protea
ne
software device menu tree and must be assigned, within its neWR-5 device window,
ne
software online help.
11