ページを印刷するOPERATION
RECORD:
1. Prepare to record by selecting the desired song, drum kit, tempo,
drum off setting and reverb setting.
2. Start recording by pressing the (REC) button, the LED light behind the
button will start flashing to indicate you are ready to start recording.
Hit the (START/STOP) button to start or stop recording.
3. If "FL" appears on the screen, the memory is full and you have been
recording for too long.
INPUT & OUTPUT:
PHONES
KICK
HI H AT
USB
USB JACK:
The EDP420 will output all the MIDI information generated by hitting the pads or stepping
on the pedal via the MIDI output connector. It can also receive MIDI data from an external
device.
12V
PEDALS:
The two pedals you can attach have been
provided. There is a kick and a hi-hat pedal that
can be connected to the back of the EDP420.
- Page 10 -