- ページ 2

チューナー Ashton CPT200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ashton CPT200 2 ページ。 Clip-on chromatic tuner

POWER ON/OFF

Please ensure that the batteries are inserted correctly.

1. Press 'power' to turn the unit on. Hold down the power button to turn the unit off, and

preserve the current mode parameters.

Function:

The initial setting mode is chromatic tuner (C).

1. To change the mode between tuner and metronome press POWER BUTTON key (1).

2. The metronome function features an A4 range of 410-490 Hz. Press UP key (3) or DOWN

key (4) to calibrate.

3. Pick up mode: CLIP or MIC. Press M/C key (2) to switch pick up mode.

4. Flat tuning: set b-bb-bbb-bbbb by holding down M/C key (2) under tuner mode.

USING TUNER

1. Select your tuning mode by pressing the M/C button. For CLIP, clip your tuner onto your

instrument and play. For MIC, place the tuner close to where you want to tune.

2. Play the note you intend to tune, the tuner will pick up the note and display it. Use the lined

indicator on the left of the screen to correctly tune. The midpoint indicates that it is in tune.

Note: The available tuning notes are (C, C#, D, D#, E, F, F#, G, G#, A, A#, B).

USING METRONOME

1. Press the POWER key to enter the metronome function whilst the tuner is on.

2. Press the M/C key to toggle through various metronome speeds (30-280bpm). You can

manually adjust the metronome tempo by pressing the (+) and (-) buttons.

Note: If there is no operation for 3 minutes, the unit will turn off automatically.

SPECIFICATIONS

TUNER SPECIFICATIONS:

Tuning modes: Chromatic

Detection Range: B0 - B7

A4 Calibration: 410 - 490Hz

Tuning Options: CLIP/MIC

Tolerance: +/-1cent

REPLACING BATTERY

Please pay attention to the polarities of the battery (negative and positive) when inserting.

To change the battery pull out the tray and replace.

The battery for this device is: 3V CR2032 Coin Battery.

METRONOME SPECIFICATIONS:

Tempo: 30 - 280 bpm

Battery: 3V CR2032 Coin Battery