- ページ 10

食器洗い機 Asko D3432のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Asko D3432 16 ページ。 Asko d3432 dishwasher quick start guide (french)
Asko D3432 にも：クイック・スタート・マニュアル (2 ページ), (スペイン語) 操作とケア (16 ページ), (フランス語) 使用マニュアル (16 ページ), (フランス語）クイック・スタート・ガイド (2 ページ)

ページを印刷する

CLEANING THE DRAIN PUMP

On occasion something may get through the filters and

into the drain pump. The drain pumps on ASKO

dishwashers are designed to automatically reverse if

anything should get caught in the propellers, thus ejecting

the item back into the sump area or down the drain.

Should you need to remove an obstacle from the drain,

first turn the power off then remove the filters (as

explained on page 9). Next, lift out the adaptor piece on

the left side of the sump area. (You might want to remove

any standing water first.) You can then look into the sump

area for the item causing the obstruction. You may need

to use your finger to move the pump blade and loosen

the object. Should you find something, simply scoop it

out then replace the adaptor piece and the filters.

WARNING!

Never run the dishwasher without the filters in

place.

O O O O O VERFILL PR

VERFILL PR

VERFILL PRO O O O O TECTION

VERFILL PR

Your ASKO dishwasher has an overfill protection device

that automatically shuts off the inlet valve and circulation

pump and starts the drain pump if the water level in the

unit should rise above the normal level. If this happens,

turn the water off at the main supply and call for service.

ENERGY SA

ENER

GY SA

GY SAVING

VING

VING TIPS

VING

ENER

GY SA

VING

♦

If you plan to wash the dishes right away, there's no

need to pre-rinse. Simply scrape off large particles

and load the dishes.

♦

Wash only full loads.

♦

Use the Pots & Pans and Heavy wash programs only

for heavily soiled dishes.

Page 10

TECTION

TIPS

To reach an item caught in the drain pump, remove the

filters then the small black insert in the sump area.

WARNING!

Be sure to replace the adaptor piece before you

put the filters back in.

If there is water in the base pan due to an overfill or

small leak, the water must be removed before the

dishwasher will start.

When an overfill is detected, the Heavy wash light will

flash. (See Fault Messages on page 8.)

♦

Don't use the high temperature for lightly soiled

dishes.

♦

Avoid using the heated dry option. (You can speed

up the drying process by opening the door slightly to

release the moist air.)