- ページ 9

食器洗い機 Asko D5434XXL SのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Asko D5434XXL S 16 ページ。 Classic dishwasher
Asko D5434XXL S にも：仕様 (2 ページ), 取扱説明書 (20 ページ)

PREPARING THE DISHWASHER FOR INSTALLATION

At this point the styrofoam, plastic wrap, and the wood

pallet (base) should be removed from the dishwasher.

Now is an excellent time to inspect for any shipping

damage. Should you find any damage, you should report

it to your dealer or builder immediately.

Be sure to remove the toe kick and toe kick insulation (only

on certain models) from the top of the dishwasher.

SLIDES FOR LEGS

The unit comes with white plastic slides for the legs to

protect the kitchen floor from being damaged when you

slide the unit into place. The slides simply snap onto the

bottom of the legs.

Use caution when sliding the

dishwasher into place. The protec-

tive slides could cause damage to

certain types of soft flooring.

ATTACH THE LIGHT SHIELDING FILM

(Only certain models.)

Attach the light shielding film (packed in the document

bag) to the underside of the countertop above the touch

buttons.

NOTE:

The surface on which the protective film is to be attached

must be clean and dry.

WARNING!

Make sure you put the protective slides on the legs to

prevent damaging the floor when you slide the unit into

place (see page 9).

As you do this, feed the drain line and inlet hose into the

access hole(s) in the side of the cabinet. Use caution

when sliding the dishwasher into place. The protective

slides could cause damage to certain types of soft flooring.

WARNING!

Be careful of sharp edges.

Page 9

ATTACH THE SUPPLIED DOOR SEALING

(Only certain models.)

This strip is an essential part of the Turbo Dry Express

system and must be installed to ensure an optimum

seal between the dishwasher tank and door.

Customer Care Center

1-800-898-1879