- ページ 18
室内装飾品 AKRUS AK 106 varioのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AKRUS AK 106 vario 19 ページ。 Instrument table
ページを印刷する
1. Attach table top mounting plate ( Pos. 2 ) to the top of electric lift ( Pos. 10 ) using the
countersunk screws M8x35 ( Pos. 70 ).
Position of lift
Small top, 500 x 600, center or off center
Large top 600 x 1000 (rectangular or V shape) ONLY CENTER
2. Place table top ( Pos. 4 ) upside down on the floor, place table top mounting plate on
the electric lift on table top, line up bores and tighten the 8 Spax- screws (Pos. 100).
3. Screw studs into base and secure with the lock nuts (Pos. 15, 80)..
Do not use lock nuts on the optional castors ( Pos. 16).
4. Attach base ( Pos. 1 ) to electric lift ( Pos.10 ) using the 4 cylinder head screws M8x30
( Pos. 90, 60) .
Caution Make sure the base is lined up with the table top mounting plate. (center or
off center)
5. Insert plastic covers (Pos. 17) into the spare holes, secure loose cables with wire
clamps (Pos.12) under the table top.
Pos. Nr. Artikel Nr.
1
444.010 003
2
444.031 005
4
442.050 001
442.050 002
442.050 003
10
11
100-020
15
320-115
16
320-114 +
320-116
17
330-289
60
410-025
70
793-080
80
475-030
90
445-100
100
499-092
444Montanw 0408_14.doc
Installation guide for ak 106 vario
Base plate
Table top adapter
Table top 500x600x28
Table top V- Form
Table top 600x1000
Electric lift
Main cable
Adjustable stands
Bolt
Roller
Plastic cover
Washer 8,4
Countersunk screw M8x35
Hex head nut M10
Socket head screw M8x30
Spax screws 4,5x25
Benennung
Seite 2 von 3