- ページ 12

フラッドライト ACR Electronics RCL-75のPDF 製品サポートマニュアルをオンラインで閲覧またはダウンロードできます。ACR Electronics RCL-75 20 ページ。 Remote control searchlight system
ACR Electronics RCL-75 にも： 製品サポートマニュアル (15 ページ), 製品サポートマニュアル (20 ページ)

ページを印刷する
ACR Electronics RCL-75 製品サポートマニュアル
Remove the light from its mounting location. Lamps should be
changed in an environment that includes good lighting and protection
from the weather, i.e., in a suitable work place.
2)
Remove top cover (4 top screws at sides of front, and 4 counter
sunk Phillips screws attaching top cover to lower case). Use L wrench
furnished with light (see Figure 8).
3)
Carefully remove top cover by lifting straight up (see Figure 9).
Figure 8
4) Observe shape and position of the bulb wire loop (see Figure 10).
5) Disconnect bulb wires from terminal block and with small wire snips,
remove the cable ties from bulb wires (see Figure 11).
Figure 10
Y1-03-0158G
Figure 9
Figure 11
11