- ページ 15

フラッドライト ACR Electronics RCL-75のPDF 製品サポートマニュアルをオンラインで閲覧またはダウンロードできます。ACR Electronics RCL-75 20 ページ。 Remote control searchlight system
ACR Electronics RCL-75 にも：製品サポートマニュアル (15 ページ), 製品サポートマニュアル (20 ページ)

ページを印刷する

block and screw tightened securely. Gather wires together and install

new cable ties (see Figure 19).

21)

Replace the top cover carefully, making sure the partition is

seated in its proper groove and the screw holes at the front match the

metal braces.

22)

Reinstall the four (4) long cover screws starting from the

back and work forward, then install the two (2) top screws at each side

(total of 4). Tighten all screws securely, taking care not to over-tighten.

23)

The light assembly is ready to be reinstalled on mount.

Reattach control cable and wire power leads. Precautions should be

taken to make power connections as water tight as possible.

Figure 19

Y1-03-0158G

Figure 18