ページを印刷する
Conversion instruction
Introduction
WARNING!
Performing of these instructions by a non-qualified engineer can lead to dangerous
situations.
The supplier is not responsible for the consequences (the arising of a hazardous situation
and/or damage to persons or goods) caused by incorrect performance of these instructions
by engineers who are not employees of the supplier. Consequential damage arising through
inexpert performance of these instructions is not accepted.
This conversion-set consists of original parts. Original parts are tested for suitability and safety
during the type approval of the appliance. Frequently performed batch-approvals guarantee
the quality of original parts.
The supplier recommends, when converting an appliance to another gas type, to have this
performed by an engineer of the service department. Contact the supplier to make an
appointment with a service engineer.
For addresses see the guarantee regulations of the appliance.
With this conversion-set you can convert your gas hob from natural gas (NG) to universal liqified
petroleum gas (ULPG). Before you start conversion, check whether your gas hob is genuinely set
to natural gas.
Tools
2
A. Socket spanner
B. Screw driver flat
blade
C. Screw driver Torx
D. Screw driver cross
head
Tools
E. Nose pliers
F. Open end spanner
G. Leakage test spray