- ページ 9

セキュリティシステム ACR Electronics GlobalFix PROのPDF トレーニング・マニュアルをオンラインで閲覧またはダウンロードできます。ACR Electronics GlobalFix PRO 10 ページ。 Emergency position indicating radio beacon. 406 mhz rlb-37

ページを印刷する

LONG BEACH FIRE DEPARTMENT

GlobalFix PRO 406 MHz RLB-37

FIREBOAT TRAINING MANUAL 1.1:

certified ACR Battery Replacement Centers (BRCs). Visit ACR's website at

www.acrartex.com for authorized ACR BRCs.

Servicing the SeaShelter 3

The SeaShelter 3TM Category I bracket has two main pieces, the lid and the base.

To open the bracket, turn the spring loaded knob counterclockwise 1/4 of a turn

and pull. The lid will lift away from the top of the base and disengage from the

detent at the bottom of the base. The lid is tethered to the base to help prevent loss.

Brackets are a key part of the overall beacon system. They hold a beacon ready for

deployment while preventing false alarms. Category I brackets also require

replacement of the Hydrostatic Release Unit every two years.

To remove the expired HRU (Hydrostatic Release Device

for automatic deployment)

When opening the SeaShelter 3 TM lid, note that the beacon is

installed with the lanyard face in. Pull the beacon with steady

pressure from the bracket. Do not get beacon wet while out of

bracket. The HRU has a keying feature that locks it to the

bracket. If you view the HRU rod as the center of a clock, a

properly installed HRU will rest at the 7 o'clock position, as

shown in the picture.

Safety

Safety DOs and DON'Ts

On a routine basis aboard ship, DO NOT:

• Hold or carry the beacon by its antenna

• Mount the beacon in its bracket close to large structures or magnetic

areas

• Tie the lanyard to the EPIRB bracket or any other structure

• Obscure the beacon by placing objects in front of it

On a routine basis aboard ship, DO:

LBFD MARINE DIVISION

Chapter # Page #

DECEMBER 2015