- ページ 8

換気フード Asko CW4930GのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Asko CW4930G 16 ページ。
Asko CW4930G にも：取扱説明書 (16 ページ)

USE

Cleaning filters

EN 8

Active mode

• The proximity sensor detects a user standing in front of the hood

and will illuminate the icons. After 3 seconds the lighting will

automatically switch on.

Disable the active mode

•

Simultaneously press the '+' and 'timer' key for 3 seconds.

The active mode is disabled. The display show an static 'U'.

Enable the active

•

Simultaneously press the '+' and timer key for 3 seconds.

The active mode is enabled. The display show 3 times a

blinking 'U'.

Saturation grease and carbon filters

The filters should be replaced or cleaned when the grease filter

indicator or the carbon filter indicator are lit. See chapter 'Maintenance'.

Grease filter

The filter indicator will light up after 30 operating hours.

• The grease filters should then be cleaned.

•

Reset the memory by pressing and holding the '-' key until the filter

indicator stops flashing.

Carbon filter

The filter indicator will flash after 120 operating hours.

• The carbon filter should then be cleaned or replaced.

•

Reset the memory by simultaneously pressing and holding the '-'

and '+' keys until the filter indicator stops flashing.