Amcargobikes Classic 조립 지침 - 페이지 15

{카테고리_이름} Amcargobikes Classic에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcargobikes Classic 16 페이지. Cargo bike with mechanical disc breaks

Picture 5A

• The front cables are mounted in the brake handle (see picture 5C). They are pulled through the

hole in the handlebar (see picture 5D) and through the cable holders (see picture 5E). The cables

are mounted on the brake calibers so that the brake discs can move freely. It is however OK if

there is a small "whisling" sound from the break when the wheel is turned – this will disappear

after a few days of use.

• Final adjustment is done partly at the brake calibers (see picture 2F) and partly via the two small

blank screws at the brake handle (see picture 5C) – until the bike brakes even and effectively.

• Finally the cable-holder is mounted on the back plate (see picture 5G).

Picture 5D

Picture 5C

Page 15

Picture 5B

Picture 5E