Amcargobikes Classic 조립 지침 - 페이지 6

{카테고리_이름} Amcargobikes Classic에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcargobikes Classic 16 페이지. Cargo bike with mechanical disc breaks

Picture 2C

• The two brake calibers are mounted with the 2x2 black allen key bolts. Notice: use 2-3 extra

washers per allen key bolt to ensure a good distance from the end of the bolt to the break disc.

See picture 2E.

• The position of the brake calibers versus the brake discs are adjusted via the blank allen key-

disc on the outside og the caliber and the side-by-side adjustment bolts on the brake caliber –

see picture 2F and 2G

• The brake discs should in this way run freely without touching the brake pads when the wheel

is turned. It is however OK if there is a small "whisling" sound from the brake when the wheel is

turned – this will disappear after a few days of use

• Then the bike is turned (see picture 2H).

• 2 brake calibers

• 2x2 black allen key bolts

with 2-3 ekstra washers

Page 6

Picture 2D