Amcor PLMB15KEH-410 사용 설명서 - 페이지 6

{카테고리_이름} Amcor PLMB15KEH-410에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcor PLMB15KEH-410 13 페이지. Plmb mono blocs
Amcor PLMB15KEH-410에 대해서도 마찬가지입니다: 영어 사용 설명서 (13 페이지)

페이지 인쇄

Setting the temperature

If you want to change the set temperature press

display will indicate the set temperature.

Note: Reaching the set temperature depends on the room and outdoor climatic conditions.

Mode switch

Press the

button successively until the icon representing the desired mode is appearing

(=> Cool => Fan => Heat => etc). On the LCD-display you will see:

Cooling

Each time the unit starts, it starts operating in cool mode with a set temperature of 22°C. The

fan speed will be selected automatically. Heat mode is only available on EH models.

Fan speed

If you prefer a constant fan speed instead of the auto fan speed, press the

successively; the fan icon

• Fast - for the turbo speed

• Normal - for the medium speed

• Slow - for the slow speed

• Alternating - for the auto fan speed (in the cooling mode only!)

Switching LCD backlight ON/OFF

• If you prefer to switch the LCD backlight oﬀ, push the

time. After blinking twice the backlihgt will be switched oﬀ after 3 sec.

• By pushing any button on the control panel the backlight will switch on again.

Heat

EH models feature a

1680

the mode switch select

temperature is reached. Fan speed is selected automatically. Do not place the unit near

anything that could catch ﬁre or be scorched. Do not obstruct the air outlet. The heat

function will operate with or without the hose attached.

Timer

For all of the following TIMER programming, proceed ﬁrstly with these standard steps:

• Press the

button brieﬂy; the 2 left digits of the 4 digits on the LCD display are ﬂashing.

• Press

to adjust the hour.

• Press the

button brieﬂy again, the 2 right digits of the 4 digits are ﬂashing.

• Press

to adjust the minutes of the clock in intervals of 5 minutes. The timer is set.

After 10 seconds the time display returns.

Programming the timer for ON - when the unit is OFF.

• Perform the standard steps as described above.

The circular time scale will be on between the ON programmed times

until 24:00. The ﬂashing bar on the time scale indicates the real time and

moves a segment ahead every 30 minutes until it reaches the ON timer

time, then the black segments in the circular time scale will disappear.

6 6

Fan only

on the LCD-display will rotate accordingly.

W electric heater that can heat a room on cooler days. With

, set the desired temperature and the unit will heat until this

to set the temperature. The 2 digit

Heat

and

buttons at the same

button

Timer example