Amcrest SmartHome AL-KIT1-PP 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Amcrest SmartHome AL-KIT1-PP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amcrest SmartHome AL-KIT1-PP 11 페이지. Home alarm system
Amcrest SmartHome AL-KIT1-PP에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (4 페이지)

페이지 인쇄

Speciﬁcations

Environment

Indoor

Max Detection Distance

Less than 3/4"

Operating

14°F ~ 113°F

Operating Humidity

0-95% RH

Battery

CR1632

Protocol

Bluetooth 5.0

LED Behavior

Please refer to the table below for details regarding the

LED behavior of the device.

Behavior

Flashing Rapidly

Solid (for 2 seconds)

Flashing (3 times)

Flashing Rapidly

(after pairing)

Steady Flash

CHOKING HAZARD

WARNING:

KEEP OUT OF REACH OF CHILDREN.

Description

Sensor is pairing.

Pairing successful

Pairing failed.

**Try repeating setup.

Alarm has been triggered.

Firmware upgrade.

Pairing the Sensor

1. Locate the Alarm Hub on

the main menu.

2. Tap on the "+" icon to pair

the sensor to the hub.

3. Follow the on-screen

prompts to finish pairing the

sensor.

4. Test the sensor by moving

the small magnetic portion

along the right side of the

sensor. The LED on the

sensor will flash once it has

detected motion.

It is recommended to keep the small

Note:

magnetic portion 3/4" away from the sesnor.

Do not place the small magnetic portion

directly on the sensor.