AMD SB710 사용자 설명서 - 페이지 14

{카테고리_이름} AMD SB710에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD SB710 19 페이지. Based m/b for socket am2/am2+/am3 series quad core processor
AMD SB710에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

(2) USB Port Headers (9-pin): USB1

This USB header IS used for connecting the additional USB port plug. By

attaching an option USB cable, your can be provided with two additional USB

plugs affixed to the back panel.

(3) Speaker connector: SPEAK1

This 4-pin header connects to the case-mounted speaker. See the figure below.

(4) Power LED: PWR LED/PWRLED1

The Power LED is light on while the system power is on. Connect the Power

LED from the system case to this pin.

(5) IDE Activity LED: HD LED

This header connects to the hard disk activity indicator light on the case.

(6) Reset switch lead: RESET

This 2-pin header connects to the case-mounted reset switch for rebooting your

computer without having to turn off your power switch. This is a preferred

method of rebooting in order to prolong the lift of the system's power supply.

See the figure below.

(7) Power switch: PWR BTN

This 2-pin header connects to the case-mounted power switch to power

ON/OFF the system.

(8) FAN Power Headers: SYSFAN1 (3-pin), CPUFAN (4-pin)

These connectors support cooling fans of 350mA (4.2 Watts) or less, depending

on the fan manufacturer, the wire and plug may be different. The red wire should

be positive, while the black should be ground. Connect the fan's plug to the

board taking into consideration the polarity of connector.

Pin 1

USB Port Headers

PWRLED1

Pin 1

JW FP1

SPEAK1

Pin 1

System Case Connections