AMD SB710 사용자 설명서 - 페이지 16

{카테고리_이름} AMD SB710에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD SB710 19 페이지. Based m/b for socket am2/am2+/am3 series quad core processor
AMD SB710에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

3-3 Jumper Setting

(1) Keyboard/USB function Enabled/Disabled: JP1

(2) CMOS RAM Clear (2-pin): JBAT1

A battery must be used to retain the motherboard configuration in CMOS RAM,

short 1-2 pins of JBAT to clear the CMOS data.

To clear the CMOS, follow the procedure below:

Turn off the system and unplug the AC power

Remove ATX power cable from ATX power connector

Locate JBAT and short pins 1-2 for a few seconds, if shorted with the jump cap,

short for a few seconds then pull out the hat.

Connect ATX power cable back to ATX power connector

Note: When should clear CMOS

1. Troubleshooting

2. Forget password

3. After over clocking system boot fail

JP1

1-2 Closed KB/USB Power ON Disable (Default)

Keyboard/ Mouse & USB Power On Setting

JBAT

1-2 Open： Normal

CMOS Clear Setting

JP1

2-3 Closed KB/USB Pow er ON Enabled

1-2 Short： CMOS Clear