AMD DIrect SSRFR-24WD 사용자 설명서 - 페이지 5

{카테고리_이름} AMD DIrect SSRFR-24WD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD DIrect SSRFR-24WD 9 페이지. 15” & 24” wine cooler

페이지 인쇄

BEFORE OPERATING

Shipment Arriving Damaged:

VISIBLE DAMAGE

If your shipment arrives with visible damage to the

box/carton, be sure the damage is noted on the

bill of freight or express receipt and signed by the

person making the delivery. File a claim for damages

immediately, regardless of the extent of damage.

CONCEALED DAMAGES

If damages are unnoticed until the refrigerator is

unpacked, notify the transportation company or

carrier immediately and file a concealed damage

claim with them. This should be done within (5)

days of the delivery date. Be sure to hold on to

the box/carton for inspection. We cannot assume

responsibility for damage or loss incurred in transit.

Important Notes:

BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.

Before connecting the appliance to the power

source, let it stand upright for approximately

24 hours. This will reduce the possibility of a

malfunction in the cooling system from handling

during transportation. Clean the interior surface with

lukewarm water using a soft cloth. Install the handle

on the door if not already attached.

It is recommended that you install the appliance in

a place where the ambient temperature is between

60°F and 90°F (16°C-32°C). If the ambient temperature

is above or below recommended temperatures,

the performance of the unit may be affected. For

example, placing your unit in extremely cold or

hot conditions may cause interior temperatures to

fluctuate. The operating temperature range may not

be reached.

CAUTION

Remove the exterior and interior packing.

Before plugging in the appliance, let it stand

upright for approximately 24 hours.

Doing this will reduce the possibility of a

malfunction in the cooling system from handling

during transportation.

Clean the interior surface with lukewarm water

using a soft cloth.

Install the handle on the door if it is not already

attached (see detailed instructions below)

15" & 24" WINE COOLER USER MANUAL

ELECTRICAL CONNECTION

WARNING

Improper use of the grounded plug can result in

electrical shock.

This fridge should be properly grounded for your

safety. The power cord of this fridge is equipped

with a 3-prong plug which fits with a standard

3- prong wall outlet to minimize the possibility of

electrical shock.

Do not under any circumstances cut or remove

the third (ground) prong from the power cord

supplied. For personal safety, this appliance must

be properly grounded.

This appliance requires a standard 110 Volt AC

60Hz three-prong grounded electrical outlet.

Ensure that the wall outlet and circuit have been

checked by a qualified electrician and confirmed

to be properly grounded.

If only a 2-prong wall outlet is available, it is your

responsibility and obligation to have it replaced

with a properly grounded 3-prong wall outlet.

To prevent accidental injury, the cord should

be secured behind the appliance and not left

exposed or dangling.

This fridge should always be plugged into its

own individual electrical outlet which has a

voltage rating that matches the rating label on the

appliance. This will allow the best performance

and also prevent overloading house wiring

circuits that could cause a fire hazard from

overheating. Never unplug the fridge by pulling

on the power cord. Always grip the plug head

firmly and pull straight out from the receptacle.

Immediately repair or replace all power cords

that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion

damage along its length or at either end.

When moving the appliance, be careful not to

damage the power cord.

ASSEMBLY & INSTALLATION

Installing the Fridge

This fridge is designed to be either built-in or

freestanding.

NOTE: This appliance may be used for the storage of

medicine and other medical products.

Place your fridge on a floor that is strong enough to

support it when it is fully loaded. To level the unit,

adjust the front leveling legs, or the screws on the

wheels.

Make sure that the air vent at the front of the

appliance is never covered or blocked in any way.

NOTE: It is recommended that you do not install the

appliance near an oven, radiator or other heating

source. Any nearby heat sources may increase

electrical consumption. Do not install in a location

where the temperature will fall below S0° F (~10°C) or

above 110° F (~43°C). For best performance, do not

install the fridge behind a cabinet door or block the

vent in the front.

Avoid installing the fridge anywhere with excessive

moisture.

Plug the fridge into a properly grounded wall outlet.

Do not plug the fridge into a power strip or extension

cord.

EXTENSION CORD

Because of potential safety hazards under certain

conditions, it is strongly recommended that you

do not use an extension cord with this appliance.

However, if you must use an extension cord, it is

absolutely necessary that it be a UL/CUL-Listed,

3-wire grounding type appliance extension cord

having a grounding type plug and outlet and that the

electrical rating of the cord be 110 volts.

INSTALLING THE STAINLESS STEEL HANDLE

To install the handle, follow the instructions below:

1. Remove the rubber gasket from the right side of

the inside of the door (you don't need to remove

the whole gasket, just the side that covers the

openings for the screws).

2. Remove the screws from the included bag. Feed

the screws through the holes from the inside until

they poke through to the outside front of the door

frame.

3. Align the handle with the two screws, then tighten

the screws into the handle using a screwdriver

until the handle is both flush and secured tightly

against the door frame. DO NOT overtighten the

screws, as you may cause damage to the door

frame.