AMD DIrect GWS-7711 설치 및 운영 지침 매뉴얼 - 페이지 5
{카테고리_이름} AMD DIrect GWS-7711에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMD DIrect GWS-7711 6 페이지. Glass windshields
페이지 인쇄Tools Needed: Phillips screwdriver, soft leather gloves for
handling glass, dry flat smooth surface large enough to
accommodate the windshield for assembly.
CAUTION: It is recommended for two people to assemble
the glass windshield. Lay the glass panels on a soft non-
abrasive flat surface to keep windshield level.
Curved Top
Bracket
4- Round Glass Panels
Fig. 11 Shows carton glass panels and rectangular wind-
shield brackets.
STEP 1: Begin working from the bottom up by connecting
two glass panels using the straight brackets and (with foot).
Each glass panel should slide all the way into the bracket
and top edge should be flush with edge of glass. See Fig.
12.
Fig. 12 Securing the brackets screws with a Phillips
screwdriver.
Glass Windshields
INSTALLATION FOR ROUND WINDSHIELDS
Curved Bottom
Bracket
Bottom
Top
STEP 1: Work your way around the glass panels. Keep the
screws loose to ensure the brackets are positioned
correctly with the glass panel all the way inside the bracket.
See Fig. 13. Tighten only after all the brackets are properly
in place. Note: Screw heads are to be positioned on the
inside of the windshield.
Push glass
tight to
inside
bracket
Bottom Bracket
Fig. 13 Shows glass paned edge against inside of bracket.
STEP 3: Ensure all bracket screws are tightened as much
as possible and are properly pressed against the glass.
Slowly and carefully, flip the windshield over to the other
side with the feet now touching the ground.
Fig. 14 Shows completed windshield upright and ready for
installation over fire pit.
WARNING:
Carefully secure the screws into position but do not
over-tighten. Warranty does not cover glass
breakage during the assembly process.
of
REV. D
Page 5