ACR STOVES PR-1200e 사용 설명서 - 페이지 5

{카테고리_이름} ACR STOVES PR-1200e에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR STOVES PR-1200e 17 페이지. Electric fireplace insert range

Please take a few moments to read through the following steps to enable your insert

to be unpacked without causing any damage to yourself or your new fireplace.

• Place the carton on a clean, flat surface and

ensure that you have sufficient space to work.

• Remove any rings, watches or bracelets

which could scratch the product or could

themselves be damaged during the

unpacking process.

• Carefully lift the appliance from the carton

and place the packaging to one side – do not

destroy the packaging as this may be

required for future transportation. Please

Optional Side Panels for the

PR-1200e model

When unpacked, the PR-1200e model has only

one pane of glass visible at the front. Each side

section is covered with a blanking plate.

If the PR-1200e is to be installed as a two or

three sided appliance you will need to remove

the plate / plates. To achieve this, remove the

screws from the frame on the body of the

insert, remove the blanking plate and then refit

the frame to the body and secure in place with

the screws.

Unpacking Instructions

Thank you for purchasing an ACR Fireplace Insert.

ensure that plastic bags are kept away from

children and animals.

• Plug the appliance into the mains to check it

is working prior to carrying out the

installation.

• Follow the instructions on the body of the

appliance to remove the pack from inside.

This appliance is designed for use ONLY as

described in this manual. Any other use

could lead to bodily harm and / or fire.