Canon 9318A004AA 간소화된 서비스 매뉴얼 - 페이지 18

{카테고리_이름} Canon 9318A004AA에 대한 간소화된 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 9318A004AA 22 페이지.

페이지 인쇄

- Due to user error, the actual remaining ink level does not match the indicated remaining ink level,

resulting in "ink out", etc.

User error: Forgetting to reset the ink counter / ink counter reset other than when replacing ink

- Due to the specific print pattern, the actual remaining ink level does not match the indicated

remaining ink level, resulting in "ink out".

Specific print pattern: Continuous printing using any one of the CMY colors of ink / continuous

(4) Print head deep cleaning

The printer has a print head deep cleaning (refreshing) function.

Print head deep cleaning (refreshing):

- Excessive ink consumption when conducting print head deep cleaning repeatedly. (The amount of

ink used is approx. 10 to 15 times the normal manual cleaning amount.)

<Reference> Cleaning types, amount of ink used, and time required

BK and CL ink drawing is simultaneously performed.

Manual cleaning

Dot count cleaning

Cleaning on arrival at user

Print head replacement

Timer cleaning (24 hours to 3 months)

Cleaning when the print head is not capped at printer power on

Ink tank replacement

Print head deep cleaning

Timer cleaning (3 months or more)

(5) Print head alignment

The printer has a print head alignment function (print head position adjustment function). As it is not

necessary to perform print head alignment at setup or installation of the printer, the function is only briefly

introduced at installation.

Print head alignment:

tanks.

BK solid printing, etc.

This is a deep cleaning function in order to resolve print failure due to ink clogging

the print head. (The black ink is pigment-based, and clogs easier than other

dye-based ink.)

Perform from the printer driver's Maintenance tab.

Cleaning type

This is a function to correct displacements between the nozzle lines of the

print head, and incorrect print position at bi-directional printing.

The adjustment is conducted using the printed head position adjustment

pattern.

A: Print head alignment between black even and odd nozzles

B: Print head alignment between cyan even and odd large nozzles

C: Print head alignment between magenta even and odd large nozzles

D: Print head alignment between cyan even and odd small nozzles

E: Print head alignment between magenta even and odd small nozzles

F: Print head alignment in bi-directional black printing

G: Print head alignment of large nozzles in color bi-directional printing

H: Print head alignment between black and photo black nozzles

Amount of ink used

BK: Approx. 0.12 g

CL: Approx. 0.14 g

BK: Approx. 0.42 g

CL: Approx. 0.52 g

BK: Approx. 0.57 g

CL: Approx. 0.62 g

BK: Approx. 1.50 g

CL: Approx. 2.35 g

Time required

Approx. 40 sec.

Approx. 60 sec.

Approx. 70 sec.