Canon 9319A004AA 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Canon 9319A004AA에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 9319A004AA 22 페이지. Service manual

7-2. Servicing in Asia

- Elimination of Major Component Connectors on the Logic Board Ass'y -

In the iP1500, the LF and CR motors and the LF encoder are soldered to the logic board ass'y, and

the connectors which were used in prior models are eliminated.

In addition, the CR flexible cable is soldered to the print head to eliminate the connector. (However, in

peak periods of production, instead of soldering, the connector may be used for the CR flexible cable

on the print head side.)

In replacing the logic board ass'y, remove the solder from the backside of the logic board's LF motor,

CR motor, and LF encoder cable connections, and re-solder them to the replaced logic board ass'y.

Regarding the CR flexible cable, as servicing is to be conducted by replacement of the print unit, no

solder removal or re-soldering of the cable itself is required.

Logic Board Ass'y

CR Flexible Cable (Print Head Side)

( 13 / 21 )