AeroClave RDS 3110 빠른 참조 매뉴얼 - 페이지 4

{카테고리_이름} AeroClave RDS 3110에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AeroClave RDS 3110 5 페이지.
AeroClave RDS 3110에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (4 페이지)

NOTE: When operating in Ambulance mode. The screen shown in (Figure 1) will be present on

the screen upon powering up the RDS 3110 system. Upon turning on the red arming switch,

the screen shown in (Figure 2) will appear. To clear the error, as shown in (Figure 3), connect

the ADP connector hose to the RDS 3110 system.

Figure 1

1. Press the start button, the LED lights will begin to blink

2. The RDS 3110 system will fog for 6 minutes

3. After the fog, allow the ambulance to sit uninterrupted for a minimum of 10

minutes.

4. After the 10 minutes, the LED lights will stop blinking, and you can open the

doors to the ambulance.

5. Allow any haze or fog to dissipate before entering the ambulance.

6. If there is any excessive moisture, simply allow to dry or manually wipe away.

RDS 3110 Quick Reference Guide

with

For ambulances

either an ADP-PT or ADP- EX port

Figure 2

Figure 3